bopa film
Product Description
Product Specifications:
Typical Thickness: 15-50μm
Width: 100-600mm
Roll Diameter: 300-610mm
Feature: 1.Excellent resistance to puncture and abrasion 2.Wide temperature use range (-60C ~150C) 3.Good barrier against oxygen, nitrogen, carbon dioxide and odor 4.Resistant to acid, alkaline, grease and different kinds of common organic solvent 5.High transparency and glossy. BOPA (NYLON) Film Application: Type of BOA,TOA-C and OA-1 can be applied in the process of printing and laminating, TOA-S and OA-2 in laminating without printing. BOPA films are humidity sensitive, which may cause printing or laminating defect in high humidity absorption and impacting the usage satisfaction, thence, users are recommended to process the unpacked film rolls quickly, pack the printed films with aluminum metallized films, and laminate them without delay. To obtain products’ good quality, BOPA is not suggested being processed in the humidity over 75%RH. BOPA (NYLON) Film Type: BOPA: Balanced type / TOA-C: Print & lamination / TOA-S: Lamination / OA-1: Print & lamination / OA-2: Lamination
BOPA Film – Nylon Film – Technical Date Sheet
Important Notes: 1.Generally used as composite flexible packaging composite, insulation materials and high-end label film. Through the process control and increasing the thickness, the barrier properties can be further improved. 2. Other special peculiarity of film are available according to customer's requirement, besides the products above mentioned. 3.It is the responsibility of our customer to determine that the use of our product(s) is safe, lawful, and technically suitable in their intended applications. The Values given in the technical date sheet represent typical values based on the best of our knowledge as on date when the date was compiled. It is offered solely to provide possible suggestions for your own experimentation and not as guarantee for the material supplied. The user is solely responsible for the end use of the product and needs to perform their own tests to confirm the product suitability / compatibility in all respects. Zhengyi Packaging Film Gives no warranty or accept liability for any loss and fitness of the product for any specific purpose. And the Zhengyi Packaging Film reserves the right to change the technical date sheet at any time for enhancing the quality of the products without prior information Contact us if you need more details on Pa Transparent Film. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Nylon Film、Pa Film. If these products fail to match your need, please contact us and we would like to provide relevant information.
Typical Thickness: 15-50μm
Width: 100-600mm
Roll Diameter: 300-610mm
Feature: 1.Excellent resistance to puncture and abrasion 2.Wide temperature use range (-60C ~150C) 3.Good barrier against oxygen, nitrogen, carbon dioxide and odor 4.Resistant to acid, alkaline, grease and different kinds of common organic solvent 5.High transparency and glossy. BOPA (NYLON) Film Application: Type of BOA,TOA-C and OA-1 can be applied in the process of printing and laminating, TOA-S and OA-2 in laminating without printing. BOPA films are humidity sensitive, which may cause printing or laminating defect in high humidity absorption and impacting the usage satisfaction, thence, users are recommended to process the unpacked film rolls quickly, pack the printed films with aluminum metallized films, and laminate them without delay. To obtain products’ good quality, BOPA is not suggested being processed in the humidity over 75%RH. BOPA (NYLON) Film Type: BOPA: Balanced type / TOA-C: Print & lamination / TOA-S: Lamination / OA-1: Print & lamination / OA-2: Lamination
BOPA Film – Nylon Film – Technical Date Sheet
PROPERTIES | TESTING METHOD | UNIT | TYPICAL VALUE BOA | TYPICAL VALUE TOA-C | TYPICAL VALUE OA-1 | |
---|---|---|---|---|---|---|
Thickness | GB 6672 | μm | 15 | 15 | 15 | |
Density | GB 1033 | g/cm3 | 1.14 | 1.14 | 1.14 | |
Tensile Strength | MD | GB 13022 | MPa | 230 | 230 | 235 |
TD | GB 13022 | MPa | 235 | 265 | 300 | |
Elongation at Break | MD | GB 13022 | % | 95 | 128 | 125 |
TD | GB 13022 | % | 85 | 85 | 90 | |
Heat Shrinkage (160C × 5min) | MD | GB 12026 | % | 1.3 | 1.0 | 1.3 |
TD | GB 12026 | % | 0.8 | 1.2 | 1.6 | |
Surface Tension | GB/T 14216 | mN/m | 60 | 60 | 58 | |
Haze | GB 2410 | % | 1.0 | 2.8 | 2.8 | |
Oxygen Permeability | GB 1038 | cm3/(m2 .24h.latm) | 30 | 30 | 30 |
Product Categories : Metalized Film
Premium Related Products
Other Products
Hot Products
Mirror reflective silver film high gloss optical PET film for cigarette gift box packagingPVDC coated high barrier pet/ pvc lamination filmCamping aluminum foil film for rescue blanketColor laminating PET Mylar coated filmCPP metallized polyester film with sealing for jellyTransparent PET Roll of MylarMPET with PE FilmTransparent BOPP Plain Film for Packaging & PrintingColor Coated Metalized PET Twist Film/color laminating film/color coating filmM type pet film for metallic yarn silver and gold colorFlexible packaging PET self adhesive glossy gold silver metalized film for polyester12micron pallet stretch film/heat shrink film/ldpe shrink filmHologrpahic Film/Laser Film and Opaque Metallic Holographic Thermal Lamination Films for Printing and Gift PackagingPure silver metallic yarn/japanese metallic yarn/rainbow metallic yarn1/128" polyester glitter powderreflective mylar PET film/aluminum foil laminating film/gold metalized pet film